Monday 31 August 2015

UNBRICKING/FLASHING STOCK ROM ON MOTOROLA ANDROID DEVICES USING RSD LITE

STEPS

Download MOTOROLA Drivers.

Download RSD Lite.

Install the RSD Lite on your computer.

Download the stock android ROM or updated ROM of your Motorola device.

Unzip the stock ROM.

Inside the extracted folder there is a .XLM file. 

Launch RSD Lite.

Load the ROM by clicking on the three dot button; navigate to the extracted folder & select the .xml file
Boot your Motorola Device into fastboot mode. (Hold Vol. up & vol Down then press Power button.
Select AP Fastboot)

Connect the device with your computer by using phone’s USB cord.

RSD Lite will detect the device & fastboot and connected will appear.

Click on Start.
Wait for the process to complete.

Phone will reboot.

First boot after this process takes a while be patient.

If phone boot loops, Enter recovery and do a factory reset.

HOW TO FLASH/UPGRADE LG ANDROID DEVICES

FLASHING STEPS

This can be done using LG Flash Tool.

This process can also be used if you want to upgrade or downlgrade your device to any official android version of the device released by LG.

Download the stock rom (firmware) of the LG device you want to flash/unbrick or update/downlgrade.

Download and install LG drivers.

Download and extract LG Flash Tool.

Copy KDZ file from ROM (firmware) folder into LG Flash Tool Folder.

Charge battery up to 50%

Boot the device into download mode by holding volume down button then connect device to PC via usb.

Launch LGFlashTool as administrator (If it cannot start, download and install visual c++ runtime).

Select Type - CDMA

Phone Mode - DIAG

Select KDZ File (Choose the KDZ file inside the LG FLash Tool folder)

Click Normal for flashing the device without loosing any data.

Click CSE Flash to do a full flash of the device. Use this when upgrading, downgrading or unbricking the device.

Click START.

A dialogue box will appear for you to select language.

Click OK.

Now Wait for the process to reach 100%

First boot after flash will take a while......

Do a factory reset after first boot.

Wednesday 26 August 2015

HOW TO REMOVE BLOATWARE ON ANY ANDROID PHONE

THE BIG QUESTIONS
1.WHAT ARE BLOATWARES?
2.ARE BLOATWARES HARMFUL?
3.HOW DO I REMOVE BLOATWARES?


                     YOUR PHONE MUST BE ROOTED CLICK

 
BLOATWARES;This is any software that comes pre-installed on an android phone which the phone do not need to function.

ARE BLOATWARES HARMFUL; NO. But they might consume valuable resources like disk space or memory, resulting in a reduced performance.

HOW DO I REMOVE BLOATWARES; 

Your must be rooted to do this.

Download and install Titanium Backup 

Be sure what to delete so as not to delete apps your phone needs to function

I advice you do a Nandroid backup before doing this and other system tweaks.

Open Titanium Backup.

Click on Backup/Restore.

Apps in red are the system apps.

Apps in green are installed apps.

Highlight any app you want to uninstall.

Click uninstall.

Reboot the phone after this 


FOR ENQUIRIES   08154648482


HOW TO CHANGE AN ANDROID VERSION (build.prop method)

How To Change An Android Version (build.prop method)

Build.prop is a file in the android system file

To edit this the phone must be rooted

To access this file.Es explorer is used

Once installed, open es explorer and navigate to /device

Once in the device internal memory, Locate system

Enter system and look for build.prop

There is also build.prop.bak (dont tamper  this file)

Open build.prop and edit using ES NOTE EDITOR



-edit Android Version by locating ro.build.version.release= and changing the current Build Version.
- Edit your Model # by locating ro.product.model= and changing your model #
- change your product brand by locating ro.product.brand=
-edit

Please Note that if you change the product brand, the name MUST be in ALL LOWERCASE LETTERS!!!

  After editing press Save, exit the app and reboot the phone.
Once phone  reboots, go to Settings/About and see the changes

FOR ENQUIRIES  08154648482


Tuesday 25 August 2015

HOW TO FLASH NOKIA BB5 PHONES USING CRACKED INFINITY BEST

NOKIA BB5 PHONES
Download the cracked infinity best. Contact me for unzip code

Steps to flash a nokia  BB5 Phone using the software

1.Unzip the file content to a folder 

2.Run the best software

3.Select the appropriate rm

4.For jav. Phones : use mcu,ppm 1 and cnt 1

5.For symbian phones: use mcu, ppm 2 and cnt 1

6.Attach the correct flash files

7.Select deadmode 
8.Select full flash and hit start

9.Connect the nokia phone before best time out 
and tab the power button twice.

10.Phone will flash and notify when done

Contact me for enquiries

08154648482

HOW TO UNLOCK ZTE MODEMS

TO UNLOCK VARIOUS VERSIONS OF ZTE MODEMS
FOLLOW THE INSTRUCTIONS BELOW


DOWNLOAD Dc crap with unlimited credit.

Contact me for unzip code and instructions on how to unlock


FOR ENQUIRIES  08154648482


HOW TO FLASH A NOKIA LUMIA PHONE

RECOVERING A BRICKED LUMIA PHONE

I AM NOT RESPONSIBLE IF YOU FURTHER BRICK THE LUMIA PHONE IN THE PROCESS, THOUGH ITS UNLIKELY TO HAPPEN IF YOU FOLLOW ALL THE INSTRUCTIONS

Procedure

1. Download and Install Nokia Care Suite.

2. Download the correct Rm of the Lumia phone

3.Charge Phone to atleast 50percent.

4.Create a folder on the desktop name (Products)

5.Create another folder named Rm-xxx (where xxx is the rm number eg Rm-761)

6.Copy the downloaded Rm to the Rm-xxx folder and move Rm-xxx to the folder Products

7.The final path should look like this C:desktop/products/Rm-761/

8. Disconnect the phone from the computer and run Nokia Care Suite

9. Run Product Support Tool for Store 5.0 by double-clicking on it

10.  Go to File > Open Product

11. Select your phone type from the list and click Open

12. Click on Programming, then Recovery.

13. If you’ve been following the steps carefully and your firmware is already in the right folder, you should see it listed on this page after selecting Recovery.

14.Hit the start button to begin the process but like I warned, don’t plug in your phone yet. At this point, Nokia Care Suite should verify your firmware files.

15.After this, you should be told your phone isn’t detected. It is only now you can plug in your phone via USB.
– Plug it in
– Hold down the Vloume down and Power button till you feel a soft vibration
– Release this buttons and hit the Retry button on Nokia Care Suite. Then hold the Volum Up key till Nokia Care Suite says Rebooting.
16. Flashing should start now

The flashing process will take a while and will notify you once done

FOR ENQUIRIES  08154648482

Monday 24 August 2015

HOW TO MINIMISE/MANAGE DATA ON ANY ANDROID DEVICE

Your phone must be rooted.

To learn how to root your phone click HERE

1.Root your phone.

2.Download and install superUser.

3.Download and install AFwall+ (its available on google playstore and other app stores)

4.Configure the afwall+ to accept or reject internet connections according to your preference.

PSIPHON FOR ANDROID

This tutorial is aimed at teaching you how to browse and download on your android phone using simple tweaks. No need to change imei

STEPS
1.Your phone must be rooted CLICK

2.After rooting and succesfully installing superUser

3.Download and install psiphon

Its available on google playstore and other app stores

4.Use Mtn default settings OR Configure your phone network connection  using

Apn: web.gprs.mtnnigeria.net
Ip:127.0.0.1

5.Configure psiphon using the following settings
 -          Proxy Type: Real Host(Under X-Online-Host)

-          Proxy Server: web.blackberry.com

-          Real Proxy Type: Inject

-          Real Proxy Server: 127.0.0.1

-          Real Proxy Port: 8080

Tap on Save to close the Handler Settings. Then a pop up will appear and you have to choose “Tunnel whole device”

If prompted fpr region, select USA

     Go down and locate “More options” under the “Handler” button.

      Under the “Proxy Settings” Check the box beside “Connect through an HTTP” then select “Use System network settings”

6.Do a blackberry daily plan using the code Bblited to 21600

7.Switch on your phone data.

8.Connect psiphon and surf unlimited.

NOTE. PLAN LASTS FOR A DAY. WEEKLY PLAN ALSO WORKS AND COST 350
FOR MORE INFO: CONTACT ME ON
08154648482

HOW TO UNLOCK HUWAI MODEMS USING THE UNIVERSAL UNLOCKER

To unlock your huwaie modems so as to be able to use multiple networks on it.

 DOWNLOAD the universal unlocker and follow the instructions

1.Extract the zip file.

2.Run the universal mastercode 

3.Input the modem imei

4.Hit calculate

5.Install the modem on a Pc with an Alien Sim

6.When prompted for unlock code,put the calculated code.