Friday 8 January 2016

HOW TO ROOT SAMSUNG GALAXY S3 SC-06D

Before you start this, Verify that your phone has ‘Build Number: IMM76D.SC06DOMALK2 or earlier.

DOWNLOAD and Extract SAMSUNG S3 SC-06D 4.0.4 ROOTKIT

      "contents of folder"
      a. EFSBackups SC-06D
      b. ODIN.zip
      c. SC06D-JB-MR1-KBC-CWM-V6.0.1.2_r15-recovery-signed.zip
      d. sgs3_rooting_supersu_v3.zip
      e. SC06D-JB-MR1-KBC-CWM-V6.0.1.2_r15-recovery-odin.tar.md5
      f. stock_recovery.tar.md5
 
1. Install Samsung ADB Drivers onto the PC.
2. Copy and paste sgs3_rooting_supersu_v3.zip to memory card.
3. Open ODIN. *** UNCHECK AUTO REBOOT!!**

4. Boot the phone to Download Mode by holding down the Vol Down + Home buttons while its booting. Release the buttons once some Japanese text comes up. Just hit the Vol Up button to accept (Vol Down means "Cancel") The screen should now have some text in the top left corner and show the Android robot with the words “Downloading.. Do not turn off target!!”. If you do not get to this screen and end up back into Android, try again.
5. In ODIN (again, verify that AUTO REBOOT is unchecked) 

6. Click on PDA box in ODIN. Attach SC06D-ICS-KBC-CWM-V6.0.1.2_r1-recovery-odin.tar.md5.

7. Click the Start button at the bottom of ODIN. Wait for it to say “RESET”.
8. **READ THIS STEP COMPLETELY BEFORE DOING ANYTHING TO THE PHONE!!** Unplug the phone. Hold the power button down, once it goes black QUICKLY press and hold the Vol Up + Home buttons to take you directly into Recovery Mode. (DO NOT LET IT BOOT INTO ANDROID!) 
9. You should now be in Recovery Mode. You should see an orange circle with a hat on it in the middle of the screen. This is ClockWorkMod(CWM) Recovery Mode. Use the Vol Up and Vol Down buttons to move the highlight bar up and down and the Power button to select. Go to “Install zip from SD Card” and then “Choose zip from SD Card”. Select sgs3_rooting_supersu_v3.zip and flash.

10. **READ THIS STEP COMPLETELY BEFORE DOING ANYTHING TO THE PHONE!!** After the zip file as loaded, it shouldn’t take but a few seconds, highlight and use “***go back***” until you are back at the top menu. You should see “reboot system now”. Be ready to put the phone back into Download Mode again by holding the Vol Down + Home buttons. Again, you have to be quick with this and don’t let the phone go into Android. 
Note: if you skip this next step and choose to keep CWM recovery installed instead of the stock_recovery, then many of the SC-06D's functions will not work. The stock_recovery MUST be flashed/installed everytime before booting into Android.
11. Plug your phone back into your PC. Open ODIN back up, if its not still open, If it is still open hit the RESET button. You should still see “0:[COM#]” in the ID:COM box saying ODIN sees your phone. *** UNCHECK AUTO REBOOT!!** Click the PDA box again. Load up stock_recovery.tar.md5. 

12. Click the Start button at the bottom of ODIN. Wait for the box at the top left to say RESET. 
13. Reboot the phone and let it go all the way into Android. You are now Rooted!

(Note: If at any point you let the phone boot into Android by mistake while CWM recovery was still flashed, then you will find some hardware functions on the phone will be broken, the ONLY way to fix this, is to re-install stock ROM and start over)


HOW TO USE GNQC DOWNLOAD TOOL TO FLASH FIRMWARE


These are the instructions on how to use GNQC DownLoad Tool to flash stock firmware on any Qualcomm Based Android Device.Gionee E7 is one of such devices.
Requirements: Your Android device should have atleast 50percent of battery to perform the Flashing Process.

HOW TO:
1: DOWNLOAD and extract GNQC DownLoad Tool and Driver.
2: Install the USB Drivers.
3: Download and extract the Stock Rom that you want to Flash.
4: Open GNQC_DownLoad.exe
5: Click on BP Browse Button and locate the bp_image folder in the firmware.
6: Click on the AP Browse Button and add the Firmware Folder.
7: Select WBW8901 in the name path.
8: Download will highlight automatically (ready to download).
9: Power off the android device and Connect the Android Device to the Computer.
10: GNQC DownLoad Tool will begin flashing the firmware on the Android Device.
11: Once Flashing is completed, a Green Successful Status will be shown.


NOTE: If you are Unable to Choose Firmware Path: If you are not able to click on Choose Path Button, then it means you have not connected the Qualcomm Based Android Device to the computer. Try to Connect it after installing the USB Drivers and also make sure the device is Power Off.

HOW TO USE BROADCOM MULTIDOWNLOADER TO FLASH FIRMWARE


These are the instructions on how to use Broadcom MultiDownloader Tool to flash stock firmware on any Android Device with a broadcom chipset.

HOW TO :
1: DOWNLOAD and extract Broadcom MultiDownloader Tool and Drivers.
2: Install the USB Drivers.
3: Power Off the Android Device.
4: Download the Android Device Stock Rom and extract the contents.
5: Open Broadcom MultiDownloader.exe.
6: Once Broadcom MultiDownloader Tool is launched, Click on Settings and select the Configuration.
7: Under Configuration define the firmware path and select the firmware folder.
8: Once the firmware has been successfully attached in Broadcom MultiDownloader tool, click on Apply button to continue.
9: Power off and Connect the Android Device to the Computer while holding Volume UP and DOWN.
10: Once Android Device has been successfully added.
11: Click on the Start All Button to begin the Flashing Process.
12: Once Flashing is completed, a Green OK Status will be seen.
13: Done.

Friday 1 January 2016

HOW TO FLASH SONY XPERIA ANDROID DEVICES

HOW TO UNBICK/FLASH OR UPGRADE SONY XPERIA ANDROID DEVICES

REQUIREMENTS AND STEPS

Battery of atleast 40%
1. DOWNLOAD and install FlashTool.
2. Install Sony drivers(The drivers are located (After installing FlashTools) inside this directory -- C: /FlashTool/Drivers.
3. Run Flashtool-drivers.exe file, and select only fastboot drivers and flashmode drivers.
4. Download Sony Xperia Stock ROMS.
5. If packed, extract the .zip or .rar file to get a .ftf file (flash file)
6. Move the .ftf file to  C: /Flashtools/Firmware.(If folder doesnt exist, create it)
7. Open the Flashtools and click the flash image at top left.
8. Select "Flashmode" and then click "OK"
9. On the next pop up, select the ROM you want to flash and click "OK"
10. Flashtools will prepare the files for flashing. This might take a while.
11. A pop up will appear requesting to turn off device.
12. Turn the device off 
13. Hold >> Back button OR Volume Down on the device <<  and connect the USB cable to the computer so that Flashtools can easily detect the device.
14. Flashing process will begin. A progress bar will be seen at the bottom.
15. Wait for the process to finish. This takes a while depending on the size of the ROM.

16. Remove USB and reboot the device when flash is complete (First boot takes longer time)

17. Done.