Friday 8 January 2016

HOW TO USE BROADCOM MULTIDOWNLOADER TO FLASH FIRMWARE


These are the instructions on how to use Broadcom MultiDownloader Tool to flash stock firmware on any Android Device with a broadcom chipset.

HOW TO :
1: DOWNLOAD and extract Broadcom MultiDownloader Tool and Drivers.
2: Install the USB Drivers.
3: Power Off the Android Device.
4: Download the Android Device Stock Rom and extract the contents.
5: Open Broadcom MultiDownloader.exe.
6: Once Broadcom MultiDownloader Tool is launched, Click on Settings and select the Configuration.
7: Under Configuration define the firmware path and select the firmware folder.
8: Once the firmware has been successfully attached in Broadcom MultiDownloader tool, click on Apply button to continue.
9: Power off and Connect the Android Device to the Computer while holding Volume UP and DOWN.
10: Once Android Device has been successfully added.
11: Click on the Start All Button to begin the Flashing Process.
12: Once Flashing is completed, a Green OK Status will be seen.
13: Done.

No comments:

Post a Comment