Friday 8 January 2016

HOW TO USE GNQC DOWNLOAD TOOL TO FLASH FIRMWARE


These are the instructions on how to use GNQC DownLoad Tool to flash stock firmware on any Qualcomm Based Android Device.Gionee E7 is one of such devices.
Requirements: Your Android device should have atleast 50percent of battery to perform the Flashing Process.

HOW TO:
1: DOWNLOAD and extract GNQC DownLoad Tool and Driver.
2: Install the USB Drivers.
3: Download and extract the Stock Rom that you want to Flash.
4: Open GNQC_DownLoad.exe
5: Click on BP Browse Button and locate the bp_image folder in the firmware.
6: Click on the AP Browse Button and add the Firmware Folder.
7: Select WBW8901 in the name path.
8: Download will highlight automatically (ready to download).
9: Power off the android device and Connect the Android Device to the Computer.
10: GNQC DownLoad Tool will begin flashing the firmware on the Android Device.
11: Once Flashing is completed, a Green Successful Status will be shown.


NOTE: If you are Unable to Choose Firmware Path: If you are not able to click on Choose Path Button, then it means you have not connected the Qualcomm Based Android Device to the computer. Try to Connect it after installing the USB Drivers and also make sure the device is Power Off.

2 comments:

  1. Hi Admin,

    I'm getting error while flashing, please help me

    Open COM port fails, please check if other program are using the COM port[Diagnostics]!!!

    ReplyDelete